FAQ

Have Questions? Read our FAQ's to find the answer!

Will this work for in MY bag or cart?

Yes, this product works in any bag. Thats the whole idea! The product has been tested in nearly all bags and carts and it has always worked.

Is this product patented?

It most certainly is! With professional help, this product has a pending utility patent in both the USA and Canada with a priority date of May 25th, 2024. You can invest the time and money into designing this for yourself, however you cannot legally sell!

How much does a rack weigh?

The overall weight depends on the size of your rack. As a general rule, each slot or divider is 0.9oz [25g]. So a rack with 18 slots and two dividers would be around 18oz (500g) or a little less than 3 discs.

Do I loose any space in my bag?

By having 3 slot types, the number of discs you can carry should remain largely the same. You do however loose the ability to 'cram' or 'overfill' your bag.

How do I know what to buy?

Take a look at how you normally build you bag or cart and purchase according to that. The Standard Pack is usually the best starting point and you can purchase additional modules as needed to customize to your liking.

What if my string is too short?

the string is designed to comfortably hold together the standard rack, which covers the majority of players, however if your rack is too large to use a single string, you can use a second strings! With one string per side, you can easily build a rack that spans 3 ft which is the average shelf length. Alternatively, if using the large rack in a bag or cart, you can string one side.

Can I cut my string to fit my rack?

Do not cut your string! The string is cut using a hot-knife and a fixture to ensure the ends do not fray. If you cut the string yourself, the string will not easily fit in the holes. If you want to tidy up the excess string after you've built your rack, pass it through the secondary hole provided on each side of the modules.

Can I use the putter slots in the upper Pocket?

This was not the intended design so I cannot guarantee it will work with your specific bag, but yes you can! A lot of people do this. In general, if the floor of your upper pocket is fairly flat, it should work. Bags with a heavy angle to the upper pocket won't work quite as well for this. An angled putter variation will be released in the future for this purpose.

Will my rack melt in the sun?

No, the rack is made out of PETG and is temperature resistant to 160°F [70°C].